how to remove write protection from pen drive

It says “The disk is write-protected”. So now what to do? Will that be permanent? Obviously not. You can remove write protection from USB drive by using some commands. We will use windows cmd console for typing these commands. So lets start.

How To Remove Write Protection From USB drive??

• First open cmd by pressing WIN+R(Run) and then type cmd and press enter.
  
• Now you will see something like below (CMD console). Type diskpart and press enter. Like i have done.
  
• Diskpart will start now. Now type list disk and press enter. Refer image below.
  
• Now it will list the disks connected. You have to select disk 1.
  Type select disk 1 and press enter.
  
• Now we will remove write protection from usb drive.
  type attributes disk clear readonly and press enter.
  
• Sometimes after you have executed the command, you have to remove and reinsert the usb, to remove write protection successfully.
• Now you have full access over your usb drive. You can copy,delete and modify all of its content,

In this way you have successfully remove write protection from USB drive. So its basically few commands. If you do it in the right way as mentioned above, then this method will definitely work out for you.

Source: Technofall